Polaris 2014 Sportsman 570 EF, Руководство по обслуживанию

Страница: 190 / 456

4.44
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
Engine Controller Reprogramming (Reflash)
Process Overview
The reprogramming feature is in the Special Tests menu
on the Digital Wrench screen. Start Digital Wrench and
click on the Special Tests menu icon (red tool box). A
technician should be familiar with the process and with
computer operation in general before attempting to
reprogram an ECU.
The Digital Wrench Engine Controller Reprogramming
(or “Reflash”) feature allows reprogramming of the ECU
fuel and ignition map. To successfully reprogram the
ECU, an Authorization Key must be obtained by entering
a Request Code in the box provided on the Reflash
Authorization site. The Request Code is automatically
generated by Digital Wrench during the reprogramming
process. The Reflash Authorization site is located under
the “
Service and Warranty ” drop down menu on the
dealer website at: www.polarisdealers.com .
NOTE: Failure to follow the reprogramming
instructions completely and correctly can result in
an engine that does not run! Replacement ECUs are
programmed as “no-start” and require a reflash for
them to work.
Reprogramming (Reflash) Tips:
• BATTERY VOLTAGE: The majority of problems
with reprogramming can be attributed to a low
battery. Be sure the battery voltage (no load) is at
least 13 volts and at least 12.5 volts with the key
‘ON’. Connect a battery charger if necessary to
bring voltage level above minimum. Fully charge
the battery before you attempt to reprogram.
• DEDICATED LAPTOP: Best results are obtained
using a laptop computer that is “dedicated to
Digital Wrench”. A laptop that is used by a variety
of people and in several applications around the
dealership
is more likely to cause a
reprogramming problem than one dedicated to
Digital Wrench diagnostics only.
• OBTAINING THE LATEST UPDATE:
Reprogramming updates are provided periodically
and contain the most recent calibrations (see
“Digital Wrench Updates”).
• CLOSE NON-ESSENTIAL PROGRAMS: Polaris
recommends that you DO NOT install non-
essential programs on a Service Department
laptop.
Camera detection software, Virus
Scanners, Tool Bars, etc. may clog up memory if
running in the background and make it harder for
the diagnostic software to operate.
• KNOW THE PROCESS: If you are not familiar with
the entire reprogramming process, review the
HELP section of the diagnostic software before
you attempt reprogramming. Click on the
? on the
tool bar or press F11. The information in the on-
line help is the most current and complete
information available. This should be your first step
until you are familiar with the process.
• COMMUNICATION PROBLEMS: If you have had
problems communicating with a vehicle while
performing diagnostic functions, do not attempt
reprogramming until the cause has been identified
and fixed. Check all connections, and be sure
battery voltage is as specified.
FUEL SYSTEM - GENERAL