Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 235 / 260

Chapter 10 Maintenance
229
Lubrication
Danger!
Unintended crane movement during lubrication creates an acute risk
of fatality for the operator and others.
Therefore turn off the crane every time before lubricating.
Grease nipples must take grease easily. Replace any damaged or seized grease nipples. If it is
impossible to press in grease even after replacing the nipple, contact your PALFINGER partner.
Lubricating:
Warning!
Dirt in the bearing may cause damage to the unit and increase repair
cost and downtime.
x
Remove all old, dirty grease and other contamination from the lubricating point. Otherwise dirt in
old grease will be pressed into the bearing point.
x
Press the grease into the bearing point.
x Move the components. This distributes the grease in the bearing.
x Press more grease into the grease nipple.
x
Repeat this until fresh grease begins to come out of the bearing point.
Warning!
Excess grease at lubricating points and bearing points increases the
risk of accident and is a danger to the environment.
x After lubricating remove any excess grease.
x
Do not use excess grease again.
x Dispose of excess grease in accordance with the applicable national legislation!
Grease all lubricating points on the unit.