Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 98 / 260

Safety equipment
92
Status codes:
Display of saved Paltronic status codes:
List of five errors that occurred last in chronological order - the most recently
registered code listed first. Status reports (example: overload) do not get
displayed.
1. Date the last error occurred.
2. Status code.
3. Time associated with the error occurring.
4. Error's sub-code (there is not always one).
5. Number, showing how often the error has occurred.
Quit status code:
RESET function for quitting the available messages.
Select using PALdrive on the 'Information' menu, press SELECT button (this
resets any displayed errors that are still pending).
Red folder icon with content:
At least 1 error is pending. Quitting is possible.
Yellow folder icon with no content.
No errors pending. There is therefore also no quitting necessary.
Note!
All pending errors must be quit by hand. Only in this way do any
functions disabled as a result of the error by the overload protection
device get enabled again.
Dangerous situations (example: overload) get reset automatically
when the crane is back within the permitted range.
Additional items of information:
x You cannot quit any errors that physically still exist (example: cable break).
x Errors do not get quit when the remote control console is restarted, as the codes come from the
Paltronic crane control system.
x Codes can also be quit by restarting the Paltronic system (press the 'Emergency cut-off' button on
the terminal).