Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 250 / 260

Service
244
Gear oil
The gear oil must be replaced during the first annual service. And after that after every 3000 working
hours or once every three years, whichever comes first.
Only the PALFINGER approved gear oil PALFINGER GEAR GUARD must be used.
Property Unit
Density at 15°C [kg/m³] 900
Flashpoint (CoC) [°C] 205
Viscosity class [SAE J 306]
[ISO VG]
8W-90
150
Viscosity at 40°C
Viscosity at 100°C
[mm²/s]
159
15.6
Brookfield viscosity at -26°C [mPa*s] 128.000
Pour point [°C] < -30
Available from most PALFINGER partners according to national
guidelines under
Order no. EZ6311 – 4 l can
Order no. EZ6312 – 20 l can
Check of control equipment
Note!
The entire safety equipment must be checked during servicing
(overload test, HPSC test, etc.).
Protective hoses
During servicing, check protective hoses, covers etc. and replace damaged and missing parts.
Repairs
x
Damages to the unit must be repaired immediately by a PALFINGER partner.
x Repairs have to be recorded in the service manual.
x
If a repair is not carried out by a PALFINGER partner warranty will become void.
Lowering rate
The lowering rate must not exceed 0.2 % of the outreach per minute.