Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 130 / 260

Ancillary equipment
124
Danger!
Depending on the type of ancillary equipment, the crane has to be
turned off before attaching the device. Follow the relevant
instructions. Keep the minimum distances (see chapter 2, ‘Danger of
getting crushed’).
Carry out any necessary steps for attachment
x before starting to operate the crane,
x
when the device is turned off.
x Let only professional operators or trained personnel
carry out and complete assembly works.
Slingers, other attachments to lift the load
Hook
Danger!
Undersized, incorrectly attached, defective or unsecured crane hooks
or shackles may cause the load to drop. This creates an acute risk of
fatality for the operator and others.
x
Use hook and shackle suitable for the weight of the load that is being lifted.
x Different hooks and shackles are provided for some crane models. Depending on the load, the
relevant PALFINGER hook and shackle with bolt must be used on the associated lifting gear
.
x
Observe the load capacity given on the load lifting gear.
x The safety latch of the hook must close by means of spring pressure after the load has been
attached.
x Secure the shackle pin with the linchpin. Use only the original pin for the shackle!
x
Have any damaged safety latch or linch pin immediately replaced by a PALFINGER partner.
Warning!
When attaching and detaching loads, be aware of increased risk of
crushing.
Keep the required minimum distances to all crushing points (refer 'Danger of getting crushed' in
chapter 2).