Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 202 / 260

Crane operation
196
F
1
F
2
Set
up
78% 53%
F
1
F
2
Set
up
78% 53%
x
Fall protection mode is on and active.
x
Controls are in radio operation mode.
x Remote control handset is in cable operation mode.
x
Fall protection mode is on, but not active.
x Controls are in radio operation mode.
x
Remote control handset is not in cable operation mode.
Note!
On switching the system on and off, this function gets automatically
deactivated.
The personal fall protection mode must be re-activated by hand.
The following features are affected by activation of this function:
x AOS will be deactivated.
x
RTC will be deactivated.
x SRC will be deactivated.
x P-FOLD cannot be activated.
x
The stabilizing function cannot be activated.
x The ‘fold rope winch’ function cannot be activated.
The following settings will be made by activation:
x Crane movements (following the protected person) are only possible via remote control handset in
cable mode.
x
The crane speed is reduced (under EN 280).
x Only one crane movement can be made at a time (single-movement).
x
The ‘switchable restricted slewing area’ function gets activated. The restricted slewing area can be
released or limited by switching on or off an attached ballast weight.
Attaching the fall arrester to the crane
Can be attached in the following ways: