Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 236 / 260

Maintenance
230
Column bearing
Rim bearing, rotary actuator
x Raise the main boom completely.
x
Rim bearing: Press sufficient grease in all lubricating points.
x Slewing system: In slewing intervals of 60° press grease in all lubrication points on the slewing
system until 360° are reached. Slew the unit in order to let the grease distribute evenly over the
entire circumference.
Extension system
The low-maintenance extension system is fitted with sliders, which have self-lubricating properties and
suffer only very minor wear. Following the running-in period, the low-maintenance extension system – if
used under normal operating conditions – requires no regular lubrication. During the running in period
the sliding layer builds up from the initial lubrication. It can sometimes be necessary to spray in some
Palfinger Teflon® Spray to assist the build-up of this layer. It is also possible that in process blank
spots may arise on the gliding surface.
Prior to any relatively long periods of downtime, any blank spots should be protected from corrosion
using Palfinger Teflon® Spray.
When being used in an abrasive or corrosive environment (spreader vehicle, heavily soiled, etc. )
regular cleaning and subsequent treatment with Palfinger Teflon® Spray may be necessary.
Rope grease
Warning!
Sticking out strands can cause severe hand injuries when you
lubricate the load rope.
Therefore always wear appropriate gloves when lubricating the load rope.
1. Unwind the load rope under tension.
2. Turn off the crane.
3. Apply rope grease over the entire rope length using a cloth or brush.
4. Turn the crane on and wind up the load rope under tension.
Note!
Ensure that the load rope is wound up properly, otherwise damages
may occur under load.