Palfinger PK 34002-SH P7, Оригинальное руководство по эксплуатации

Страница: 168 / 260

Preparing for crane operation
162
Note!
High-quality supporting pads are available from all PALFINGER
partners.
Operating station support
Danger!
If the movement ranges of the supports are not completely in view of
the operator there is an acute risk of accident and danger to life.
When supporting the crane choose an operating station from where you may view the complete
support movement range. Always keep moving crane components in view. No persons and objects are
allowed to be in the movement area of the stabilizer outriggers / stabilizer cylinders.
If the crane support can be operated using the remote control, there is an operating switch on both
sides of the crane (on the operating station). This prevents operation of the stabilizer outrigger beam
on the opposite side that is out of view.
If the crane has a display at the side concerned, the function key provided on the display must be
operated.
The operating switch enables the 'Extend stabilizer outrigger beam' function for the respective side for
30 seconds. If the stabilizer outrigger beams have not been extended to the full width during the 30
seconds, the procedure can be repeated.
Danger!
If the operator is not far enough away from the stabilizer outrigger
beam that is being moved, there is an acute risk of crushing and
therefore a risk of fatal injury.
Keep a safe distance away from the moving stabilizer outrigger beam (see chapter 2 ‘Danger of getting
crushed').
The 'Retract stabilizer outrigger beam', 'Stabilizer cylinder up/down' functions can be operated without
using the operating switch.