Nidec LEROY-SOMER Powerdrive FX, Руководство по вводу в эксплуатацию

Страница: 60 / 176

60
ADVANCED PARAMETER-SETTING MODE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
03.27
: Encoder (defined by 03.26) speed feedback
Adjustment range: +/- 01.06
Format: 32 bits
This parameter indicates the speed fed back by the encoder
configured by
03.26
. During commissioning, this parameter is
used to ensure that the speed feedback system (from the
encoder to the MDX-Encoder option) is working. After
configuring open loop operation, check that 03.27 is consistent
with the actual speed.
03.28 : Not used
03.29 : Drive encoder position ( )
Adjustment range : 0 to 16383 points
Format: 16 bits
Indicates the position of the encoder in relation to the line it was
on at power-up
.
03.30 to 03.33 :Not used
03.34 : Encoder lines per revolution
Adjustment range : 0 to 32000 lpr
Factory setting : 1024 lpr
Format: 16 bits
Used to configure the number of lines per incremental encoder
revolution. Converts the encoder input into a speed.
03.35 : Not used
03.36 : Encoder supply voltage
Adjustment range : 5V (0) or 15V (1)
Factory setting : 5V (0)
Format: 8 bits
Used to choose the encoder supply voltage.
CAUTION:
Before selecting «15V», check that the encoder used can
withstand this voltage.
03.37 : Not used