Nidec LEROY-SOMER Powerdrive FX, Руководство по вводу в эксплуатацию

Страница: 160 / 176

160
ADVANCED PARAMETER-SETTING MODE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
20.40
: Kick start enable
The purpose of the Kick start function is to unblock a clogged
pump by oscillating the drive speed reference.
CAUTION:
This operation can damage the motor.
Function reserved for specific applications.
Adjustment range: 0 to 1
Factory setting: 0
Format: 8 bits
0: Disabled
1: Enabled. On the next run command, the intensive pump
unblocking sequence will be initiated.
20.41
: Kick start speed ref 1
Adjustment range: -01.06
to
+ 01.06
Factory setting: 0
Format: 32 bits
20.42
:
Kick start speed ref 2
Adjustment range: -01.06 to + 01.06
Factory setting: 0
Format: 32 bits
20.43
: Kick start main speed ref
Adjustment range: -
01.06
to +
01.06
Factory setting: 0
Format: 32 bits
Final reference used in Kick start.
20.44 : Reference running time
Adjustment range: 0.1 to 60.0 s
Factory setting: 3.0 s
Format: 16 bits
Used to set the time between each reference.
20.45
:
Acceleration/deceleration ramp
Adjustment range: 0.1 to 3200.0 s
Factory setting: 3.0 s
Used to set the ramps for each reference.
Format: 16 bits
Motor speed
Time
20.42
20.41
20.43
-20.41
-20.42
20.44 20.44
20.44 20.44 20.44
20.45 20.45
20.45