Nidec LEROY-SOMER Powerdrive FX, Руководство по вводу в эксплуатацию

Страница: 12 / 176

12
PARAMETER-SETTING INTERFACE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
2.2.3.4 - Keypad control setup
«Keypad control setup» is used to enable or disable the
Stop/Reset, Forward, Reverse and Speed reference touch-
sensitive buttons found on the « keypad control » screen,
accessible from the main page (see section 2.2.4).
keypad control is disabled by default, only the Stop/Reset
button is active.
To modify this configuration, the STO-1 and STO-2 inputs must
not be connected to the 24V.
To view the new touch-sensitive buttons that have been
enabled, you need to return to the main page, then select
«keypad control».
For more details on the «keypad control» screen, see section
2.2.4.
CAUTION:
Selections made in the «Keypad control setup» page
have interactions with the Quick or advanced Setting
parameters:
Setting the keypad reference to «Yes» forces
Spd.03
(1.14)
«Reference selector» to «Keypad».
Enabling Run/Stop commands via the keypad forces
06.43 ( Ctr.05 ) to «LCD keypad». The Stop key on the
«keypad control» page is then active regardless of the
setting of
06.12
.
Setting the «Keypad stop key» modifies the value of
06.12 .
Setting the reference via the keypad modifies the value
of 01.17 .
Cancel the entry if
you make a mistake
Type in
code 149...
...Then confirm
...Then confirm
Select the
commands
needed for
control via
the keypad...