Nidec LEROY-SOMER Powerdrive FX, Руководство по вводу в эксплуатацию

Страница: 15 / 176

15
PARAMETER-SETTING INTERFACE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
2.2.4 - Keypad control
«Keypad control « is used to control the drive interface using
the parameter-setting interface.
By default, the screen gives Informations about the drive
status, the calculated motor speed and the current magnitude.
The Stop/Reset command is also active.
This screen can be configured: the Forward, Reverse and
Speed reference commands can be activated using the
«Keypad control»
function (refer to section 2.2.3.4).
When all the commands are active, the screen below appears.
2.2.5 - «Trip history» page
«Trip history»
displays the last 10 drive trips with the precise
date and time of the event.
When the drive trips, it is displayed in a red banner, at the top
of the interface screen. When the drive trips an alarm, it is
displayed in a orange banner.
To clear a trip: resolve the problem, then press the Stop/Reset
button.
If necessary, see section 7 - Trips - Diagnostics.