Nidec LEROY-SOMER Powerdrive FX, Руководство по вводу в эксплуатацию

Страница: 8 / 176

8
PARAMETER-SETTING INTERFACE
Commissioning manual Powerdrive MD2/FX
4617 en - 2017.09 / e
2.2.3 - «Setting» page
This screen provides access to five sub-menus, all relating to
parameter setting:
- «Quick setup»: Provides access to a simplified menu used for
quick drive configuration of standard applications.
- «Advanced setting»: Provides read and/or write access to
all drive parameters (access to this page is code-protected).
- «Backup»: Used to copy the drive parameters to the
parameter-setting interface or vice versa (access to this page
is code-protected).
- «Keypad control setup»: Used to configure the FWD/REV,
Stop and Speed reference commands necessary to control
the drive via the interface (access to this page is code-
protected).
-
«HMI setup»: Used to set the interface date and time, as
well as to calibrate the touch screen and its brightness
(access to this page is code-protected).
2.2.3.1 - Quick setup
«Quick setup»
contains the most commonly used parameters.
For a more detailed explanation of the menus and parameters
offered in « Quick setup », refer to section 4.
To modify a parameter value, refer to section 2.2.3.2.
Choice of Menu
(Ctr, Mtr, I/O, etc)
Choice of Parameter No.
(Ctr02, Ctr03, Ctr04, etc)
Selected Quick
Menu Name
Parameter
Name
Parameter No.,
value and unit
Address
(Parameter Menu) in
“Advanced Parameter Setting”