NF EC1000SA, Инструкция по эксплуатации

Страница: 137 / 283

5.2 Basic Operations
EC1000SA 5-7
Table5-3. Items in SET Menu
Icon Item Reference
Select output mode
See “5.3.1 Output mode setting”.
Select output voltage range
See “5.3.2 Output voltage range
setting”.
Set AC voltage to be output
See “5.3.3 Setting output
voltage ”.
Set DC voltage to be output
See “5.3.3 Setting output voltage ”.
Set frequency to be output
See “5.3.4 Setting output
frequency”.
Set phase when output is on
See “5.3.5 Output initial phase
settings”.
Set waveform to be output
See “5.3.6 Waveform settings”.
Select external sync signal source
See “4.7 Synchronize the Output
with External Signal”.
Set external input gain
See “4.9 Amplification of External
Signal”.
Set peak current limit value (positive)
See “5.3.7 Peak current limiter
settings”.
Set peak current limit value (negative)
See “5.3.7 Peak current limiter
settings”.
Set RMS current limit value
See “5.3.8 RMS current limiter
settings”.
Set use of other functions, and
miscellaneous items
See “Table5-4. Items in MISC
Menu”.