NF EC1000SA, Инструкция по эксплуатации

Страница: 189 / 283

6.2 Command List
EC1000SA 6-11
Table6-11. Common Command List (Common Commands and Queries)
Common Commands
and Queries
Name Function
*CLS Clear command Clears standard event register, etc.
*ESE Standard event enable command Sets standard event enable register.
*ESR? Standard event register query Queries standard event register.
*IDN? Identification query Queries device ID information.
*OPC Operation complete command
When device operation is completed, the
standard event register operation complete
message (OPC) is generated.
*RCL Recall command Reads contents of specified setting memory.
*RST Reset command
Executes device reset.
*In this device, the processing that is
performed is similar to initializing the
setting memory.
*SAV Store command Saves contents of specified setting memory.
*SRE Service request enable command
Queries settings in the service request enable
register.
*STB? Read status byte query
Queries status byte and master summary
status bit.
*TST? Self test query
Executes auto test of device and returns the
results.
*For this device, “0” is always returned.
*WAI Wait to continue command
Sets device in wait mode until all operations
are completed.