NF EC1000SA, Инструкция по эксплуатации

Страница: 23 / 283

2.1 Checking Before Use
EC1000SA 2-2
2.1 Checking Before Use
Before installing and using the EC1000SA, make sure that it has not been damaged during shipment, and
check that all the accessories and all parts of the main unit are included. If anything is missing, contact the
NF Corporation or our agent from which the product was purchased.
Safety check
To ensure safety in using the EC1000SA, the user should read the following sections of this instruction
manual before using the EC1000SA:
See “Safety Precautions” (provided at the beginning of this instruction manual)
See “2.3 Grounding and Power Supply Connection”
Appearance and accessories check
If an abnormality (such as a flaw or dent) is found on the outside surface of the corrugated box,
carefully check if the product is adversely affected when removing the product from the corrugated
box.
After opening the corrugated box, check the items contained in the box.
If an abnormality such as a flaw or dent is found on the product, or an accessory is missing, contact NF
Corporation or our agent.
Appearance check
Check that no abnormalities such as a flaw and dent are found on the panel, controls, connectors, and
so forth.
Accessories check
The accessories of this product are listed below. Check that all items are included and not flawed.
This product contains high-voltage parts. Never remove the cover.
All internal inspections of this product are to be performed only by service technicians qualified by
NF Corporation.
•
Instruction Manual (EC1000SA Instruction Manual) 1
•
Control software (CD-ROM) 1
•
Power cord 1 (varies depending on destination, 15 A/125 V for Japan, 2 m approx.) 1
•
Power cord 2 (10 A/250 V, without plug, for Japan, North America, and Europe only,
1.5 m approx.) 1
！ ！ ！ ！
WARNING