NF EC1000SA, Инструкция по эксплуатации

Страница: 147 / 283

5.3 SET Menu
EC1000SA 5-17
5.3.3 Setting output voltage
The output voltage settings listed below can be made for the two operation modes.
Table5-13. Output Voltage Settings
Operation Mode Setting Setting Range Resolution
AC mode
(AC-INT,
AC-ADD,
AC-SYNC)
AC
voltage
100 V range
0.0 to 155.0 Vrms
0.1 Vrms
0.0 to 440.0 Vp-p
0.1 Vp-p
200 V range
0.0 to 310.0 Vrms
0.1 Vrms
0.0 to 880.0 Vp-p
0.1 Vp-p
AC+DC mode
(AC+DC-INT,
AC+DC-ADD,
AC+DC-SYNC)
DC
voltage
100 V range
−
220.0 to +220.0 V
0.1 V
200 V range
−
440.0 to +440.0 V
0.1 V
AC
voltage
100 V range
0.0 to 155.0 Vrms
0.1 Vrms
0.0 to 440.0 Vp-p
0.1 Vp-p
200 V range
0.0 to 310.0 Vrms
0.1 Vrms
0.0 to 880.0 Vp-p
0.1 Vp-p
When the selected AC voltage waveform is either SIN (sine wave) or SQU (square wave), the AC voltage
setting is made in Vrms units. When it is ARB (arbitrary waveform) 1 to 16, this setting is made in Vp-p
units.
Operation steps
Select either “AC voltage” or “DC voltage” in the output voltage SET menu then set a
numerical value.
See “3.4.5 Setting output voltage” , for description of output voltage setting.
See also “4.1.4 Setting the output voltage” .