NF EC1000SA, Инструкция по эксплуатации

Страница: 235 / 283

6.7 Programming example
EC1000SA 6-57
6.7 Programming example
Refer to "Remote Control Programming Example" included in the attached CD-ROM.
6.8 Programming Precautions
a) Arbitrary waveform data
Arbitrary waveform data comprises a block of binary data. The preceding ASCII program message
command field and the binary data block arbitrary waveform data should be transferred at the same
time. Always transfer arbitrary waveform data in 4096-word (8192-byte) batches. If the data count is
insufficient, an error may occur, in which case the correct waveforms cannot be output.
b) Caution concerning commands issued via the USB interface
When transferring commands, LF (0AH) must be appended at the end of the transmitted message
string as the program message terminator. If a command is sent without appending this LF, operation
will be incorrect.
6.9 Notes on Remote Control
If you are using USB interface and your PC environment is as follows, be sure to exit the program before
turning off this product. Otherwise, the program will be forced to shut down and some processes will
remain on OS because the VISA driver software cannot detect that power of this product is surely off.
OS: Windows VISTA
VISA driver software: NI-VISA