NF EC1000SA, Инструкция по эксплуатации

Страница: 134 / 283

5.1 Screen Configuration
EC1000SA 5-4
5.1.1 Status icons
The status window displays status icons that indicate the status of the EC1000SA.
These status icons are listed n Table5-1 .
Table5-1. Status Icons List
Icon Item Description
Battery almost depleted
When a backup memory checksum error occurs, this icon
flashes to indicate that the battery is almost depleted.
Unlock
This icon goes on when external line synchronization is
disabled.
Calibration data
valid/invalid This icon flashes when the calibration data is invalid
(uncalibrated).
Busy This icon goes on to indicate busy status.
Limiter operations
These icons are displayed in the same positions on the control
panel. When the limiter operates, the displayed icons change as
shown below.
During peak current limiter operation: appears.
During RMS current limiter operation:
appears.
During power limiter operation: appears.
Sequence is being executed
These icons are displayed in the same positions on the control
panel. The displayed icons change as shown below according
to the sequence status.
In Idle mode:
Nothing is displayed.
In Run mode: is displayed.
In Hold mode: is displayed.
Sequence hold
Keylock This icon goes on when keylock is on.
Remote
The displayed icons change as shown below according to the
EC1000SA status.
Local:
Nothing is displayed.
Remote: is displayed.
Local lock out:
is displayed.