NF EC1000SA, Инструкция по эксплуатации

Страница: 84 / 283

4.2 Measurement of Inrush Current
EC1000SA 4-16
4.2.2 Set phase at output on
To set the phase at output on, select “Phase at output on” in the SET menu and set a numerical
value.
Before changing the phase at output on, set output off.
Operation steps
1.
Press the or key to move the cursor to the icon.
ENTER CANCEL
Cursor
2.
Press the
ENTER
key to display the modification box.
ENTER CANCEL
Modification box
3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
4.
Press the
CANCEL
or
ENTER
key to close the modification box.
I ncrease Decrease