devices from accessing the network. You can also view information about connected
devices.
To set up network access control and view information about connected devices:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Select the Turn on Access Control check box.
You must select this check box before you can specify an access rule and use the
Allow all new devices to connect and Block all new devices from connecting
buttons. When the Turn on Access Control check box is cleared, all devices are
allowed to connect, even if a device is in the list of blocked devices.
6. Click the Apply button.
Your settings are saved.
7. Select an access rule for new devices that are not currently connected:
• Allow all new devices to connect. With this setting, if you add a new device, it
can access your network. You do not need to enter its MAC address on this page.
We recommend that you leave this radio button selected.
User Manual
87
Security, Firewall, and Access
Rules
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
