Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Make sure that the Enable Password Reset check box is selected.
This check box is selected by default.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your settings are saved.
Recover the local device admin password
When you use the Setup Wizard for the initial log-in process, you must both customize
the local device password and set up password recovery. If three local login failures
occur, you can try to recover the password. This recovery process is supported in the
Internet Explorer, Firefox, Chrome, and Safari browsers.
To recover your local device password:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
User Manual
141
Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
