Time and Network Time Protocol server
By default, the AP receives its time settings from a NETGEAR Network Time Protocol
(NTP) server. You can change to another NTP server or set the time zone and daylight
saving time manually.
Manually set the time zone and adjust the daylight saving
time
The AP might detect the time zone automatically or you might need to adjust the time
zone and daylight saving time settings. When the AP synchronizes its clock with a Network
Time Protocol (NTP) server, the AP detects the correct date and time. If the AP does not
detect the correct date and time, you might need to manually set the time zone and
adjust the daylight saving time setting.
To manually set the time zone and adjust the daylight saving time setting:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5. From the Time Zone menu, select the time zone for the area in which the AP operates.
User Manual
145
Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
