To enable or disable the automatic update of the Performance Optimization
Database:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select BASIC > Quality of Service.
The QoS Setup page displays.
In the Performance Optimization Database section, the version and release of the
database are displayed.
5. Select or clear the Automatically update performance optimization database
check box.
6. Click the Apply button.
Your settings are saved.
7. To immediately let the AP update the Performance Optimization Database if an
update is available, click the Update Now button.
Manage WiFi Multimedia (WMM) for a radio
WiFi Multimedia (WMM) is a subset of the 802.11e standard. Time-dependent information
such as video or audio is given higher priority than normal traffic. For WMM to function
correctly, WiFi clients must also support WMM. By enabling WMM, you allow WMM to
User Manual
108
Optimize Performance
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
