The firmware version is stated in the Firmware Version field at the top right of the page.
Back up or restore the settings
The configuration settings of the AP are stored within the AP in a configuration file. You
can back up (save) this file to your computer or restore it.
Back up the AP settings
You can save a copy of the current configuration settings.
To back up the AP’s configuration file:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Back Up button.
6. Choose a location to store the file on your computer.
The backup file ends in
.cfg
.
7. Follow the directions of your browser to save the file.
User Manual
137
Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
