3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Internet Port pane (in router mode) or in the LAN Port pane (in access point
mode), click the Show Statistics button.
A pop-up window displays, showing the following information:
•
System Up Time. The time elapsed since the AP was last restarted.
•
Port. The statistics for the WAN (Internet) port, LAN (Ethernet) ports, and WLANs.
For each port, the window displays the following information:
-
Status. The link status of the port.
-
TxPkts. The number of packets transmitted on this port since reset or manual
clear.
-
RxPkts. The number of packets received on this port since reset or manual
clear.
-
Collisions. The number of collisions on this port since reset or manual clear.
-
Tx B/s. The current transmission (outbound) bandwidth used on the WAN
and LAN ports.
-
Rx B/s. The current reception (inbound) bandwidth used on the WAN and
LAN ports.
-
Up Time. The time elapsed since this port acquired the link.
6. To manage the polling, do one of the following:
•
To change the polling frequency, which is the interval at which the statistics are
updated in this window, enter a time in seconds in the Poll Interval field and
click the Set Interval button.
•
To stop the polling entirely, click the Stop button.
User Manual
157
Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
