NEC ShieldPRO N22A, Руководство пользователя

Страница: 48 / 173

48

Do not enter the suspend (standby) or hibernate status in the following cases:

Executing system change job (including setting driver or adding printer),

Outputting data to printer,

Replaying audio or motion picture,

Reading/writing data from/to memory card or hard disk,

Reading/writing data from/to floppy disk, CD-R or DVD-R,

Using application not applicable to the suspend (standby) state feature,

When using a peripheral device or expansion card that does not support the suspend
(standby) and hibernate features

Executing Windows start or exit processing, or

If N22A is entered into the suspend (standby) state during connection to network through fax
modem or LAN by communication software, the network feature is aborted once. Some
applications accessing to network may cause data to be lost when N22A is entered into the
suspend (standby) state. Before using an application accessing to network, contact a system
administrator to check if the suspend (standby) state may be used.

When transiting to the suspend (standby) or hibernate status
Do not replace disks and PC and memory card. Failure to follow this instruction may
cause data to be saved improperly.
Do not connect or disconnect a USB device and IEEE 1394 device to/from N22A.

During suspend (standby) or hibernate status
Power is consumed during the suspend (standby) status. The saved data will be lost
if the battery becomes depleted. Be sure to connect the AC adapter during the
suspend (standby) status.
Do not connect or disconnect peripheral devices, otherwise this product may not
resume normally.
Other notes

If a SCSI PC card is used, N22A cannot be resumed properly depending on the combination
of the SCSI PC card and the connected device.

To make N22A resumed immediately after entering it into the suspend (standby) state, wait
for five seconds or longer from transition to the suspend (standby) state. It is required not to
impose a burden on N22A excessively.

After recovery from the pause state, nothing may appear on the LCD display. In this case,
touch the touch pad (mouse) or press any key to restore the normal display.

Resolution taken if resume feature is executed improperly
The following situations indicate improper execution of the resume feature:

Applications do not operate or

The data having existed before the suspend (standby) state cannot be restored.

The machine will not resume even if the power switch is pressed.
During use of applications causing these situations, do not use the suspend (standby)
and resume features. If N22A cannot be resumed by pressing the power switch, press
the power switch continuously for about four seconds or longer.
The power lamp disappears and the power is turned off forcibly. Then the settings in
the BIOS Setup Menu may return to the factory default values.
Provide settings for the BIOS Setup Menu again if required.