NEC ShieldPRO N22A Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 173

NEC ShieldPRO N22A Скачать руководство пользователя страница 52

52

2.4 KEYBOARD

2.4.1 English Keyboard

Using Hot Keys [Fn]

Combining

Fn

with another key allows various operations on N22A to be done easily.

These are called hot key features.
Some icons indicating the features resulting from combinations of respective keys with

Fn

are

printed on the keys with the same color as

Fn

.

The table below lists the hot keys and their features.

Key combination

Feature or description

Fn

+

F1

Switches the keyboard backlight from off to on (8 levels). (only for backlight
keyboard).

dark

bright

OFF

Note: Switches only between on and off when the keyboard backlight control is set

to [Interlocked] in the BIOS setting.

Fn

+

F2

Switches the ON/OFF status of the wireless LAN feature. (The external switch is on.)

Fn

+

F3

Changes the display mode to any of the following three modes if an external monitor
is connected to N22A. (for only Windows XP)
                    LCD                External monitor
                          Display on both monitors

Note:  Alternatives may be limited to

“

External monitor

”

and

“

Display on both

monitors

”

, depending on the OS used.

Fn

+

F4

Turns off the backlight of the LCD display.

Fn

+

F5

Switches enlarged display/no enlarged display of the screen in the low resolution mode.
Some operating systems do not support this feature.

Fn

+

F6

Disable computer sound (Mute Status)

Fn

+

F7

Raises the brightness of the LCD display.

Fn

+

F8

Lowers the brightness of the LCD display.

Fn

+

F9

Raises the volume of the speakers.

Fn

+

F10

Lowers the volume of the speakers.

Fn

+

F11

Switches scroll lock on/off.

Fn

+

1

Fn

+

2

FC button
Allows registered application to be started (see Chapter 5).

Fn

+

PrtScr

(Sys Rq)

System request

8 levels

⑤

«
...
50
51
52
53
54
...
»

Содержание ShieldPRO N22A














































































































































































Отзывы:

Нет отзывов