NEC ShieldPRO N22A, Руководство пользователя

Страница: 50 / 173

50
(2) Resuming from suspend (standby) status
The following three methods are available.

Press the power switch.
The power lamp illuminates in green and N22A recovers from the suspend (standby)
state (or resumes).

Press any key
Press any key

Open the LCD display
When the N22A has entered into the suspend (standby) status by closing the LCD
display, open the LCD display to resume from the suspend (standby) status.
Pause state
If jobs on N22A are halted for a long period, entering N22A into the pause state allows power
consumption to be saved.
(1) Enabling hibernate status
1. Click [Start]

[Control panel]

[Performance and maintenance]

[Power
option].
2. Click the [Hibernate status] tab, and then select
“
Enable hibernate status
”
.
3. Click [OK].
(2) Entering to hibernate status
The following three methods are available.

Enter the hibernate status from the Windows Shutdown menu.
Click [Start]

[Turn Off Computer]. Then press Shift and click [Hibernate].

Press the power switch
Enabled when [hibernate] is selected in [When the power switch of the computer is
pressed].

Close the LCD display
Enabled when [hibernate] is selected in [When the portable computer is closed].
(3) Resuming from hibernate status
The following two methods are available.

Press the power switch.
Windows is started to recover the state set when the power was turned off last by
using the pause state feature.

Open the LCD display
When the N22A has entered into the hibernate status by closing the LCD display,
open the LCD display to resume from the hibernate status.

It may take time from closing the LCD display panel until the N22A enters the suspend
(standby) status.

When the time of closing the LCD display is too short, the N22A will not enter the suspend
(standby) status. In this case, close the LCD display panel again.
After recovery from the pause state, nothing may appear on the LCD display. If so, move the
mouse or press any key on the keyboard to allow the display screen to appear properly.