NEC ShieldPRO N22A, Руководство пользователя

Страница: 142 / 173

142
6.2.2 Standard and Custom Re-setups
There are two re-setups, or standard and custom re-setups. The following describes four
re-setup patterns.
(1) Standard re-setup
Every hard disk drive in N22A can be returned to the factory default. Beginners and users
unfamiliar with HDD should always follow the procedure for re-setup.
(2) Custom re-setup
For re-setup of drive C only or change of the capacity of drive C, follow the procedure.
Select any of the following three procedures and go to Subsection
“
Custom Re-setup
”
.
1. Re-setup of drive C only in the NTFS format.
Provide only drive C in the built-in HDD with re-setup in the NTFS format.
Drive D and the other drives are not formatted and the data in the drives is left as it is.
* The capacity of drive C is not changed.
2. Re-setup of entire HDD area to a single partition
Provide the entire area of the built-in HDD with re-setup to a single partition in the
NTFS format. Drive C can have the maximum capacity.
Data in the built-in HDD is erased completely. Be sure to make backup copy of the
data.
3. Free re-setup of HDD area (re-setup by user setting)
Provide the area of the built-in HDD with re-setup to a combination of partitions of
5GB or larger in 1GB freely.
Data in the built-in HDD is erased completely. Be sure to back up the data.
For file systems NTFS, FAT32 and FAT16, click [Start]

[Help and Support]. (Searching with
keyword such as
“
File System
”
, you can view the detailed information.)