NEC ShieldPRO N22A, Руководство пользователя

Страница: 47 / 173

47
U
se
s
o
f N
2
2
A
Power-off procedure by using Windows End menu
1
Save edited data and quit all the applications.
2
On the Windows® XP screen, click [Start]

[Shutdown]. Next, click the [Shutdown]
button.
Do not press the power switch during the shutdown processing.
3
Check that the power is turned off.
After a few seconds, the screen will go dark and the power will turn off automatically.
Check that the power lamp goes off.
4
Turn off the peripheral devices.
Power-off procedure by using power switch
1
Save edited data and quit all the applications.
2
Press the power switch.
3
Check that the power is turned off.
4
Turn off the peripheral devices.
2.2.3 Power Saving Features
The suspend (standby) or hibernate features allow stopping of operation without exiting
applications. When restored, different from shutting down, the screen immediately before the
suspend (standby) or hibernate status is entered allows operation to be immediately started
(resuming).
Notes on using suspend (standby) and resume feature or hibernate status
To use the suspend (standby) and resume features, note the following. Failure to follow these
instructions may cause working data for entering N22A into the suspend (standby) state to be
lost or not to be restored.

Before entering suspend (standby) or hibernate status

When any communication device is being used, quit the communication application before
entering the suspend (standby) or hibernate status. Entering N22A into the suspend
(standby) state under communication may leave the line connected to add up the
communication fee.
Note that entering the hibernate status while communication being performed may forcibly
disconnect communication.

Before N22A can be entered into the suspend (standby) state, USB devices should be
removed from N22A. N22A with one or more USB devices connected may not be able to be
entered into the suspend (standby) state.