NEC ShieldPRO N22A, Руководство пользователя

Страница: 148 / 173

148
6.2.5 Custom Re-setup
The HDD can be restored to specified status by using the attached Recovery CD-ROMs.
Checking Items
(1) Tools to be prepared
The following tools are required for re-setup by using the recovery CD-ROMs.
Prepare the following CD-ROMs attached to N22A.

Recovery CD-ROM (WinXP)

CD-R/RW with DVD-ROM drive (FC-CW002U)
In addition, the user name and the computer name must be entered.
Define the names to be registered previously.
(2) Check items before re-setup
Be sure to return BIOS settings to the factory defaults if changed.
For how to return BIOS settings to the factory defaults, see
“
Chapter 4 Loading the BIOS
SETUP Defaults
”
.
(3) Notes on re-setup

Do not connect or add peripherals including a printer or memory devices.
Before the re-setup is completed, any peripherals including a printer and extended
memory devices should never be connected to N22A. If these peripherals are
purchased concurrently with N22A, first complete the setup of Windows XP to be
followed by connections and installations of the peripherals according to the user
’
s
guides coming with the peripherals.

Do not turn off the power on the way.
Do not turn off the power in the middle of the setup. Setting the power switch to OFF or
disconnecting the power cable in the middle of the setup may cause a fault to occur. If
the screen seems to stop on the way, the setup program may operate. This does not
indicate that the system is defected. Advance the operation according to the defined
procedure without panic.
System Restoration Procedure
1. Turn on the power of N22A.
2. If the power lamp goes on, insert the first Recovery CD-ROM disk (WinXP) in
the CD-ROM drive.
3. If the following dialog box appears, then press Enter.