NEC ShieldPRO N22A, Руководство пользователя

Страница: 73 / 173

73
U
se
s
o
f N
2
2
A
2.12.2 IEEE 1394 devices
IEEE 1394 devices, such as digital video cameras, can be connected to the N22A.
Installing an IEEE 1394 device
1
Turn on the N22A and the IEEE 1394 device.
2
Open the cover on the right side, and then connect the IEEE 1394 device to the IEEE
1394 connector.
Removing IEEE 1394 device
1
Turn off the N22A and then remove the cable from the IEEE 1394 connector.
Be sure to turn off the N22A before turning off the IEEE 1394 device.
2
Turn off the IEEE 1394 device and then remove the cable.

For some devices, driver installation or switch settings may be required before or after
connection.

Refer to the operation manual for the IEEE 1394 device to be connected before using it.

Wait at least 3 seconds between insertion or removal of an IEEE 1394 device.

Be sure to check the plug insertion direction when connecting an IEEE 1394 device.

Observe the proper procedure for removing an IEEE 1394 device. Failure to do so may
cause malfunction of the N22A.

Do not insert or remove an IEEE 1394 device during the suspend (standby) status, when
entering the suspend (standby) status, when resuming from the suspend (standby)
status, during the hibernate status, when entering the hibernate status, or when resuming
from the hibernate status.

There may be a case where the N22A cannot enter the suspend (standby) status with an
IEEE 1394 device connected. Remove the IEEE 1394 device before entering the
suspend (standby) status.

The IEEE 1394 device function may be limited, depending on the OS to be used.