NEC ShieldPRO N22A, Руководство пользователя

Страница: 103 / 173

103
S
e
tt
ing
B
IO
S
(4) Set User Password
This option allows you to set a user password. If a user password is set, accessing to the
system on booting is limited.
<User password setting procedure>
1. Select [Set User Password] and press Enter. The setting screen appears.
2. Enter a new password in field [Enter New Password] and press Enter.
3. Enter the same password in field [Confirm New Password] for confirmation and press Enter.
4. When message
“
Changes have been saved.
”
appears, press Enter.
The value in field [User Password is] is changed to [Set].
(5) User Password Protection
This option indicates whether the user password is protected or not.
Option Parameter Description
User Password Protection
Disabled
Enabled
Set to [Enabled] not to allow you to change the user
password if you enter the setup menu with the user
password.
* Shaded value: Factory-set
(6) Password on boot
Option Parameter Description
Password
Disabled
Enabled
et to [Disabled] not to request you to enter the user
on boot passwords on booting.
Set to [Enabled] to request you to enter the user
password on booting.
* This option becomes selectable after a supervisor password is set.
Shaded value: Factory-set

Without supervisor password, you cannot select an item to set the user password.
First set the supervisor password.

Entering the BIOS SETUP Utility with the supervisor password, you can check and change
all setting items.
However, entering into it with the user password, you cannot change the following items
(view only).

Items [System Time], [System Date] and [Language] on the [Main] menu

Items [Exit Saving Changes], [Exit Discarding Changes] and [Save Changes] on the
[Exit] menu
Forgetting a password, you cannot cancel the password.
Accordingly, if a password is set, manage it carefully.