NEC ShieldPRO N22A, Руководство пользователя

Страница: 112 / 173

112
Chapter 5 Installing OS and Applications
5.1 WINDOWS XP PRE-INSTALLED MODEL
5.1.1 Configuration of Windows XP Pre-installed Model
N22A of Windows XP pre-installed model has Microsoft Windows XP Professional installed at
factory shipment to be automatically booted at power-on.
The parameters are previously set to the factory defaults as shown in the table below.
Accordingly, you may not enter them on booting of N22A.
Parameter Factory default
Owner FC-USER
Organization (Not set)
Computer name FC-N22A-XXXXX
Value
“
XXXXX
”
in the computer name shows the lowest five digits of the product ID of Microsoft Windows XP
Professional.
For the product ID, see the Microsoft Windows XP Professional license label pasted on the bottom of N22A.
For how to change the computer name, see
“
Specify computer and workgroup names
”
in the Online Help of
Microsoft Windows XP Professional.
To change the owner or organization, see next subsection
“
Changing Owner and/or Organization by Modifying
Registry
”
or provide re-setup for Windows XP. For the re-setup, see
“
Chapter 6 Re-setup of Windows XP in
N22A of Pre-installed Model
”
.
For the HDD installed in N22A of pre-installed model, the first and second partitions (or system and remaining
areas respectively) are formatted at shipment from factory.
To change the format so as to assign the second partition (remaining area) to more than one drive, select [Start]

[Control Panel]

[Performance and Maintenance]

[Administrative Tools]

[Computer Management]

[Disk Management] after the setup is completed.
Standard HDD (80 GB) or wide temperature range HDD (40 GB):
Capacity (1st HDD)
First partition Second partition
20GB (NTFS)
Standard HDD: About 40GB (NTFS)
Wide temperature range HDD: About 20GB (NTFS)
Silicon disk (20GB)
Capacity (1st HDD)
First partition Second partition