NEC ShieldPRO N22A, Руководство пользователя

Страница: 41 / 173

41
1.6 INSTALLING AC ADAPTER
1
Insert the DC plug of the AC adapter into the power connector on the left side.
2
Connect the attached power cord to the AC adapter.
3
Plug the power cable into the power outlet.
Charging of the battery automatically starts.
( See
“
Battery
”
in
“
Chapter 2 Uses of N22A
”
.)
The AC adapter operates in the range
between 100 and 240 VAC.
The power cable accompanying with
the N22A is designed for 100 V
operation only. Note that it cannot be
used with an input voltage exceeding
125 VAC.
(1) Specification of AC adapter
Item Specification
Operating -20 to 50ºC Temperature
Storage -20 to 70ºC
Operating 25 to 85% RH (without condensation) Humidity
Storage 10 to 90% RH (without condensation)
Input voltage 100 to 240 VAC (±10%), 1.1 to 0.5 A, 50/60 Hz (±5%)
(The AC cord can be exclusively used for 100 VAC.)
Output voltage 16 VDC (±7%), 4.0 A
Maximum power 56 W
Cable length 1.8 m (AC cord: about 2 m)
Outside dimension 140 (W) × 63 (D) × 30.5 (H) mm
Weight About 0.5 kg (including AC cord)

The AC adapter and power cable accompanying the N22A are designed for use only with the
N22A and the battery charger (optional, FC-BC01N). Do not use them for other devices. If the
AC adapter is connected to another device, it may be damaged.

The AC cord attached to N22A is intended to be used only in Japan. If you want to use N22A in
a country other than Japan, contact your service representative on the proper power cord.

Unplug the AC adapter from the outlet first, and then disconnect the N22A or battery charger
end. If it is removed in the reverse order, the AC adapter, N22A, or battery charger may be
damaged.

Always hold each plug of the AC adapter in its removal. Do not pull the cord.
The car adapter (optional, FC-VA01N) can be used for the power supply.