NEC ShieldPRO N22A, Руководство пользователя

Страница: 67 / 173

67
U
se
s
o
f N
2
2
A
2.9 PC CARD/EXPRESS CARD
The cards listed below can be inserted into the N22A:

One card of type I or II can be inserted into the PC card slot.

One ExpressCard/34 or ExpressCard/54 card can be inserted into the express card slot.
2.9.1 Supporting CardBus
The PC card slot on FC-21S conforms to the CardBus specification.
The CardBus technology is intended for PC cards of 32-bit version.
This can accomplish the data transfer rate of up to 133Mbps at 33MHz.
SCSI host bus, graphics video and high-speed network cards are available to CardBus.
2.9.2 Installing PC Card in N22A
1
Open the cover on the right side of the N22A.
Slide the knob to the left to unlock the cover.
2
Checking the card slots.
Two card slots are available: the upper for
an express card, the lower for a PC card.
3
Insert the PC card/Express Card into the slot.
When a new card is inserted, the N22A detects it. Install an appropriate driver, according to
the screen instructions.

Some PC cards require certain system resources to be added. When such PC cards are
used, other system resources may have to be released.

The front and rear sides of a PC card are defined and thus the card must be inserted to the
mating slot in the defined orientation. Inserting a PC card to the mating slot in the wrong
orientation forcibly may cause the connector and/or slot to be damaged.

Some PC cards can be inserted to or removed from N22A without turning off the power.
However, any PC card cannot be inserted to or removed from N22A in the suspend (standby)
state.

If N22A is in the suspend (standby) or pause state, do not install or remove a PC card in or
from N22A. Changing the device configuration of N22A may cause data to be lost.

Do not install or remove a PC card in or from N22A while one or more applications operate.

Leave the eject button stored in other than removal of the PC card. Failure to follow this
instruction may cause the card and/or slot to be defected.

Remove a card, observing the proper procedure. Failure to do so may cause the N22A to
malfunction.