NEC ShieldPRO N22A, Руководство пользователя

Страница: 14 / 173

14

Other cautions
CAUTION

Use of wireless communication devices of this product
may badly affect hearing aids, such as by producing
noise.
Check for correct operation before using, to avoid hearing damage.

Be careful not to adjust the volume too loudly when using
headphones or headphone/microphone set.
Using such devices for a long time at a high volume may harm hearing.

After turning off the power of this product, wait for five
seconds or longer before the power is turned on again.
Turning on the power just after turn-off without a certain interval may
cause a malfunction or fault to occur.

Do not remove the memory cover when the power cable is
connected to an outlet or a battery is installed.
Doing so may cause electric shock.

When disconnecting the AC adapter/car adapter, first
unplug the power inlet side (cigar lighter socket side),
then unplug the PC side.
Removing the plugs in the reserve order may cause the AC adapter/car
adapter and/or this product to be damaged.

Avoid handling the product while eating, drinking and/or
smoking cigarettes.
A floppy disk contaminated with cigarette ash may cause data read/write
error or damage to the floppy disk drive.

Do not use any dirty floppy disk and/or CD-ROM.
Using a dirty floppy disk with sand, dust, and/or liquid (e.g., water) may
cause failure of the drive.

Be sure to power off this device and peripheral devices,
unplug the power cable from the outlet, and remove the
battery before maintenance.
Maintenance with power on poses an electric shock hazard.

Pay attention when relocating the product.
When relocating the product, close the LCD display panel and fix the
latches, pay attention not to give an excessive shock and/or vibration
defined in environmental specification.
If a shock and/or vibration given to the product exceeds the environmental
specification, internal hard disk drive and/or other components may be
damaged.

Notes on storage
Unplug the AC cord from the outlet if you do not use the product for a
long time.Do not leave any object made of rubber and vinyl contacting to
the product.Do not wrap the product with vinyl bag or leave rubber bands
or the like put on the product.Doing so may cause transformation of the
product surface.