NEC ShieldPRO N22A, Руководство пользователя, Страница: 146 / 173

146
(The following describes the operation after you select [No].)
10. Click [Next].
11. Message
“
Checking your Internet connectivity
”
appears and then message
“
How will this computer connect to the Internet?
”
appears.
12. Click [Skip].
13. Message
“
Ready to register with Microsoft
”
appears.
14. Select
“
No, not at this time
”
here.
15. Click [Next].
16. If message
“
Who will use this computer
”
appears, enter a user name.

Default user name: FC-USER

Without entering a user name, you cannot advance to the next step.

The data in [User Name 1] is registered as the user of [System Properties].
17. Click [Next].
18. Message
“
Thank you!
”
appears.
19. Click [Finish].
20. Message
“
Please wait
…”
appears. Wait until the screen changes without any
operation.
21. If the [Logon to Windows] screen appears, enter the password set in step 7
and click [OK].
22. Wait until the desktop screen appears.
Before the desktop screen, the [Change System Settings] screen may appear.
Before the desktop screen, the [Change System Settings] screen may appear.
In this case, wait until the desktop screen appears, click [Finish] on the [Introduction to
Windows XP] screen and click [Yes] on the [Change System Settings Screen] screen to
restart the system.
Now the operation is completed.
After re-booting, the [Welcome to the Found New Hardware Wizard] dialog box may appear.
If this occurs, provide proper settings in the following procedure:
1. If [Welcome to the Found New Hardware Wizard] appears, click
“
No, not this time
”
and then
click [Next].
2. Click
“
Install the software automatically
”
and then click [Next].
Message
“
Please wait while the wizard installs the software
…”
appears.
3. If the [Completing the Found New Hardware Wizard] dialog box appears, click [Finish].

Because WindowsXP automatically recognizes USB keyboard and mouse, specific settings
are not required.
In use of a USB keyboard,
[Standard 101/102
–
Key or Microsoft Natural PS/2 Keyboard] or [PS/2 Compatible Mouse]
may appear when you click [Start]

[All Programs]

[Accessories]

[System Tools]

[System Information] and select [Components]

[Problem Devices] in the [System
Information] dialog box.
This is a view-only problem. The USB keyboard can operate normally without any
problems.

If the keyboard or mouse is reconnected, the key layout may be set improperly.
If so, see
“
(6) Notes on change to keyboard or mouse of different key layout
”
described
below.