![background image](http://html.mh-extra.com/html/nec/n8100-1668f/n8100-1668f_user-manual_251356360.webp)
9-16 Upgrading Your Server
IMPORTANT:
Fill the slots with hard disk drives sequentially starting
from PORT0 (the rightmost slot).
Installation
Follow the procedure as described below to install 2.5-inch hard disk drives.
1.
Open the front mask.
2.
Install the hard disk drives in the disk cage.
Fully open the lever of the hard disk drive and insert the drive into the disk cage until it
hits the depth of disk cage.
After the hard disk drive is fully inserted into the cage, close the lever to fix the drive. (A
click occurs when it is locked.)
IMPORTANT:
Use the hard disk drive that is authorized by NEC.
Consult with your service representative for available hard disk drive.
NOTES:
Make sure of the orientation of the hard disk drive tray before
inserting it into the cage. Also make sure that the hooks of the hard
disk drive are engaged with the frame of the disk cage.
The slots of the disk cage contain dummy trays. To install the hard
disk drive, first remove the dummy tray according to the removal
procedure described later.
Install a dummy tray to the vacant slot of the cage to keep the
cooling effect of the server.
To remove the hard disk drive carrier, push the green tab (SAS) or blue tab (SATA) on the
lever and open the lever toward you until it stops. Then, the hard disk drive carrier is
unlocked.
Securely hold the tray and the lever and insert them straight into the disk cage.
IMPORTANT:
Removing more than one hard disk drive while the
server is powered on destroys the logical disk. Remove or replace the
hard disk drive one by one.
3.
Close the front mask.
Содержание N8100-1668F
