NEC N8100-1668F, Руководство пользователя

Страница: 136 / 572

4-62 Configuring Your Server
CONFIGURING MOTHER BOARD JUMPERS
With the BIOS SETUP utility, you can set desired passwords to protect the data stored in the server
against access from unauthorized users. When you forget the passwords, however, you may want
clear them. The following describes how to clear these passwords. You can also use the following
procedure to clear the CMOS data in the server.
IMPORTANT:

Clearing the CMOS data resumes the factory-set configuration data.

Do not change any other switch settings. Any change may cause the
server to fail or malfunction.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-9 for details.

Do not disassemble, repair, or alter the server.

Do not remove the lithium battery.

Disconnect the power plug before working with the server.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-9 for details.

Make sure to complete installation.

Do not pinch your finger with mechanical components.

Avoid installation in extreme temperature conditions.
IMPORTANT:
Components inside the server are easily affected by
static electricity. Handle a component after making your body contact
with a metallic frame section of the server to discharge the static
electricity on your body. Do not make bare hands contact with terminals
and components. See "Static Precautions" in this chapter for details of
the static electricity.