NEC N8100-1668F, Руководство пользователя

Страница: 403 / 572

Upgrading Your Server 9-59
Removal
To remove the CPU, prepare the removal referring to Steps 1 and 3 in the installation procedure and
do the reverse procedure of steps 12 to 4. To remove the heat sink, slide it a little on the level and
remove it (see "IMPORTANT" below).
IMPORTANT:

Do not remove any CPU unless it is failed.

After the operation, heat may make the cool sheet at the bottom of
the heat sink adhere to the CPU. To remove the heat sink from the
CPU, first turn the heat sink to the left and right lightly to make sure
that the heat sink can be apart from the CPU. Removing the heat
sink with it adhering to the CPU may cause the CPU and/or socket
to be defected.
Do the following procedure after a CPU is removed (or replaced).
1.
Run SETUP and select menus [Advanced] – [Processor Configuration] – [Processor
Information] in the order to confirm that the ID, L2 Cache Size, and L3 Cache Size of the
additional CPU are defined normally (see Chapter 4)