Native Instruments MASCHINE MK3, Руководство пользователя

Страница: 369 / 891

►
Turn Knob 5 and 6 to zoom in/out and scroll on the time axis (horizontal axis), respec-
tively.
►
If your pads are in Keyboard mode, turn Knob 7 to scroll on the pitch axis (vertical axis)
from events at the lowest pitch until events at the highest pitch.
The Event Edit mode is well suited for use with the Event Select mode! For example,
while in Event Edit mode, you can quickly hold EVENTS (in the TRANSPORT section of
your controller) to momentarily switch to Event Select mode, select particular events,
and release
EVENTS to switch back to Event Edit mode and edit the events you have
just selected!
The Event Edit mode additionally provides a few selection shortcuts inspired from Event
Select mode: Hold
SHIFT and use Button 5 and 6 to select/deselect all events dis-
played, and Button 7 and 8 to switch the focus to the previous/next Sound in the Group,
respectively.
Under the left display Knob 1–4 provide following editing functions:
Editing Tool Description
Knob 1 ( POSITION ) Nudges selected events, i.e. shifts selected events on the timeline
according to the Nudge Grid (the events’ offsets relative to the Nudge
Grid are preserved). Hold
SHIFT while you turn the knob to temporarily
override the Nudge Grid quantization and adjust the positions in
extremely small increments. See section
↑
7.1.7, Adjusting the Step
Grid and the Nudge Grid for more information on the Nudge Grid.
If one event only is selected, its position is shown under POSITION . If
several events are selected, the field shows (MULTI) .
See also the alternate method described below.
Knob 2 ( PITCH ) Transposes the selected events by semitones.
If one event only is selected, its pitch is shown under
PITCH . If several
events are selected, the field shows (MULTI) .
See also the alternate method described below.
Working with Patterns
Editing Events
MASCHINE - Manual - 369