manualshive.com logo in svg

Motorola MPC860 PowerQUICC, Руководство пользователя

"Motorola MPC860 PowerQUICC" - отличный продукт для тех, кто ищет высококачественный процессор. У нас вы можете найти бесплатное руководство пользователя. Скачайте его с нашего сайта и руководствуйтесь руководством для оптимальной производительности и эффективности. manualshive.com - ваш источник полезной информации для вашего продукта.

Поделиться
Скачать
background image

3-6

MPC860 PowerQUICC UserÕs Manual

MOTOROLA

Part I. Overview

DP3
IRQ6

Bidirectional

Three-state

Data Parity 3ÑThis line provides parity generation and checking for D[24Ð31] for 
transfers to a slave device initiated by the MPC860. The parity function can be 
deÞned independently for each one of the addressed memory banks (if controlled by 
the memory controller) and for the rest of the slaves on the external bus. Parity 
generation and checking is not supported for external masters.
Interrupt Request 6ÑOne of eight external inputs that can request (by means of the 
internal interrupt controller) a service routine from the core. Note that the interrupt 
request signal sent to the interrupt controller is the logical AND of this line (if deÞned 
as IRQ6) and the FRZ/IRQ6 (if deÞned as IRQ6).

BR

Bidirectional

Bus RequestÑThis signal is asserted low when a possible master is requesting 
ownership of the bus. When the MPC860 is conÞgured to work with the internal 
arbiter, this signal is conÞgured as an input. When the MPC860 is conÞgured to work 
with an external arbiter, this signal is conÞgured as an output and asserted every 
time a new transaction is intended to be initiated (no parking on the bus). 

BG

Bidirectional

Bus GrantÑThis signal is asserted low when the arbiter of the external bus grants 
the bus to a speciÞc device. When the MPC860 is conÞgured to work with the 
internal arbiter, BG is conÞgured as an output and asserted every time the external 
master asserts BR and its priority request is higher than any internal sources 
requiring a bus transfer. However, when the MPC860 is conÞgured to work with an 
external arbiter, BG is an input. 

BB

Bidirectional

Active Pull-up

Bus BusyÑThis signal is asserted low by a master to show that it owns the bus. The 
MPC860 asserts BB after the arbiter grants it bus ownership and BB is negated. 

FRZ
IRQ6

Bidirectional

FreezeÑOutput asserted to indicate that the core is in debug mode. 
Interrupt Request 6ÑOne of eight external inputs that can request (by means of the 
internal interrupt controller) a service routine from the core. Note that the interrupt 
request signal sent to the interrupt controller is the logical AND of FRZ/IRQ6 (if 
deÞned as IRQ6) and DP3/IRQ6 (if deÞned as IRQ6).

IRQ0

Input

Interrupt Request 0ÑOne of eight external inputs that can request (by means of the 
internal interrupt controller) a service routine from the core. 

IRQ1

Input

Interrupt Request 1ÑOne of eight external inputs that can request (by means of the 
internal interrupt controller) a service routine from the core. 

IRQ7

Input

Interrupt Request 7ÑOne of eight external inputs that can request (by means of the 
internal interrupt controller) a service routine from the core. 

CS[0Ð5]

Output

Chip SelectÑThese outputs enable peripheral or memory devices at programmed 
addresses if they are appropriately deÞned. CS0 can be conÞgured to be the global 
chip-select for the boot device. 

CS6
CE1_B

Output

Chip Select 6ÑThis output enables a peripheral or memory device at a programmed 
address if deÞned appropriately in the BR6 and OR6 in the memory controller. 
Card Enable 1 Slot BÑThis output enables even byte transfers when accesses to 
the PCMCIA Slot B are handled under the control of the PCMCIA interface. 

CS7
CE2_B

Output

Chip Select 7ÑThis output enables a peripheral or memory device at a programmed 
address if deÞned appropriately in the BR7 and OR7 in the memory controller. 
Card Enable 2 Slot BÑThis output enables odd byte transfers when accesses to the 
PCMCIA Slot B are handled under the control of the PCMCIA interface. 

Table 3-1. Signal Descriptions (Continued)

Name

Type

Description

 

Содержание MPC860 PowerQUICC



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC860 PowerQUICC

Eaton SC100 Operation Handbook preview
SC100
Бренд: Eaton Страницы: 86
Barco Argus Information preview
Argus
Бренд: Barco Страницы: 6
Campbell CR10 PROM Replacement Procedure preview
CR10 PROM
Бренд: Campbell Страницы: 8
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Бренд: Samson Страницы: 6
Eaton SCD24 Installation Manual preview
SCD24
Бренд: Eaton Страницы: 8
ABB RHDE250 Operating Instruction preview
RHDE250
Бренд: ABB Страницы: 44
Omega CNI16D Quick Start preview
CNI16D
Бренд: Omega Страницы: 2
Zmotion ZMC408SCAN Hardware Manual preview
ZMC408SCAN
Бренд: Zmotion Страницы: 34
S&C IntelliCap Installation Manual preview
IntelliCap
Бренд: S&C Страницы: 24
bluelab Dosetronic Instruction Manual preview
Dosetronic
Бренд: bluelab Страницы: 39
Cypress CY3643 Quick Start Manual preview
CY3643
Бренд: Cypress Страницы: 2
Dudley Wave S3 Manual preview
Wave S3
Бренд: Dudley Страницы: 8
YASKAWA CIMR-VC*****H**-00 series Quick Start Manual preview
CIMR-VC*****H**-00 series
Бренд: YASKAWA Страницы: 32
Invacare MK5 NX w/ACC Service Manual preview
MK5 NX w/ACC
Бренд: Invacare Страницы: 44
Estyma iGNEO COMPACT User Manual preview
iGNEO COMPACT
Бренд: Estyma Страницы: 56
Bettis GVO-C Series Operation And Maintenance Manual preview
GVO-C Series
Бренд: Bettis Страницы: 14
Hubbell Electric Fire Pump Controllers LXi-2400 Specifications preview
Electric Fire Pump Controllers LXi-2400
Бренд: Hubbell Страницы: 2
LAE electronic AT2-5 Instructions For Use preview
AT2-5
Бренд: LAE electronic Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды