manualshive.com logo in svg

Motorola MPC860 PowerQUICC, Руководство пользователя

"Motorola MPC860 PowerQUICC" - отличный продукт для тех, кто ищет высококачественный процессор. У нас вы можете найти бесплатное руководство пользователя. Скачайте его с нашего сайта и руководствуйтесь руководством для оптимальной производительности и эффективности. manualshive.com - ваш источник полезной информации для вашего продукта.

Поделиться
Скачать
background image

23-12

MPC860 PowerQUICC UserÕs Manual

MOTOROLA

Part V. The Communications Processor Module

23.15  Handling Errors in the SCC UART Controller

The UART controller reports character reception and transmission error conditions via the
BDs, the error counters, and the SCCE. Modem interface lines can be monitored by the port
C pins. Transmission errors are described in Table 23-7. 

Reception errors are described in Table 23-8. 

Table 23-7. Transmission Errors 

Error

Description

CTS Lost 
during 
Character 
Transmission

When CTS negates during transmission, the channel stops after Þnishing the current character. The 
CP sets TxBD[CT] and generates the TX interrupt if it is not masked. The channel resumes 
transmission after the 

RESTART

 

TRANSMIT

 command is issued and CTS is asserted. 

Note that if CTS is used, the UART also offers an asynchronous ßow control option that does not 
generate an error. See the description of PSMR[FLC] in Table 23-9.

Table 23-8. Reception Errors 

Error

Description

Overrun

Occurs when the channel overwrites the previous character in the Rx FIFO with a new character, losing 
the previous character. The channel then writes the new character to the buffer, closes it, sets RxBD[OV], 
and generates an RX interrupt if not masked. In automatic multidrop mode, the receiver enters hunt mode 
immediately.

CD Lost 
during 
Character 
Reception

If this error occurs and the channel is using this pin to automatically control reception, the channel 
terminates character reception, closes the buffer, sets RxBD[CD], and generates the RX interrupt if not 
masked. This error has the highest priority. The last character in the buffer is lost and other errors are not 
checked. In automatic multidrop mode, the receiver enters the hunt mode immediately.

Parity

When a parity error occurs, the channel writes the received character to the buffer, closes the buffer, sets 
RxBD[PR], and generates the RX interrupt if not masked. The channel also increments the parity error 
counter PAREC. In automatic multidrop mode, the receiver enters hunt mode immediately.

Noise

A noise error occurs when the three samples of a bit are not identical. When this error occurs, the channel 
writes the received character to the buffer, proceeds normally, but increments the noise error counter 
NOSEC. Note that this error does not occur in synchronous mode.

Idle 
Sequence 
Receive

If the UART is receiving data and gets an idle character (all ones), the channel begins counting 
consecutive idle characters received. If MAX_IDL is reached, the buffer is closed and an RX interrupt is 
generated if not masked. If no buffer is open, this event does not generate an interrupt or any status 
information. The internal idle counter (IDLC) is reset every time a character is received. To disable the idle 
sequence function, clear MAX_IDL.

Framing

The UART reports a framing errors when it receives a character with no stop bit, regardless of the mode. 
The channel writes the received character to the buffer, closes it, sets RxBD[FR], generates the RX 
interrupt if not masked, increments FRMEC, but does not check parity for this character. In automatic 
multidrop mode, the receiver immediately enters hunt mode. If the UART allows data with no stop bits 
(PSMR[RZS] = 1) when in synchronous mode (PSMR[SYN] = 1), framing errors are reported but 
reception continues assuming the unexpected zero is the start bit of the next character; in this case, the 
user may ignore a reported framing error until multiple framing errors occur within a short period.

Break 
Sequence

When the Þrst break sequence is received, the UART increments the break error counter BRKEC. It 
updates BRKLN when the sequence completes. After the Þrst 1 is received, the UART sets SCCE[BRKE], 
which generates an interrupt if not masked. If the UART is receiving characters when it receives a break, 
it closes the Rx buffer, sets RxBD[BR], and sets SCCE[RX], which can generate an interrupt if not 
masked. If PSMR[RZS] = 1 when the UART is in synchronous mode, a break sequence is detected after 
two successive break characters are received.

Содержание MPC860 PowerQUICC



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC860 PowerQUICC

Samson 3730-6 Mounting And Operating Instructions preview
3730-6
Бренд: Samson Страницы: 124
Samson TROVIS 5500 Operating Instructions Manual preview
TROVIS 5500
Бренд: Samson Страницы: 86
VAC V100 Troubleshooting Manual preview
V100
Бренд: VAC Страницы: 5
Walchem WebMaster Manual preview
WebMaster
Бренд: Walchem Страницы: 2
Walchem WebMaster Quick Start Manual preview
WebMaster
Бренд: Walchem Страницы: 73
Walchem W900 Series Instruction Manual preview
W900 Series
Бренд: Walchem Страницы: 126
W.E.ST. SCU-138-P Technical Documentation Manual preview
SCU-138-P
Бренд: W.E.ST. Страницы: 34
Ltech TT-DX-R4-5A Manual preview
TT-DX-R4-5A
Бренд: Ltech Страницы: 4
Motor Guard M-60R Instructions preview
M-60R
Бренд: Motor Guard Страницы: 2
H.E. Anderson Ratio Feeder J+ Advanced Series Manual preview
Ratio Feeder J+ Advanced Series
Бренд: H.E. Anderson Страницы: 11
Brooks GF100 Series Installation And Operation Manual preview
GF100 Series
Бренд: Brooks Страницы: 68
MQ Multiquip DCA20SPXU2 Operation And Parts Manual preview
DCA20SPXU2
Бренд: MQ Multiquip Страницы: 74
SEW MOVIFIT SC series Operating Instructions Manual preview
MOVIFIT SC series
Бренд: SEW Страницы: 148
WAGO 750-872 Quick Start Manual preview
750-872
Бренд: WAGO Страницы: 44
YASKAWA Sigma II Series User Manual preview
Sigma II Series
Бренд: YASKAWA Страницы: 359
VECTOR CONTROLS TCX2 Product Data Sheet preview
TCX2
Бренд: VECTOR CONTROLS Страницы: 10
Dieffematic LINEA c400 Instructions And Recommendations For The Installer preview
LINEA c400
Бренд: Dieffematic Страницы: 9
Yardian PRO19 Series User Manual preview
PRO19 Series
Бренд: Yardian Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды