manualshive.com logo in svg

Motorola MPC860 PowerQUICC, Руководство пользователя

"Motorola MPC860 PowerQUICC" - отличный продукт для тех, кто ищет высококачественный процессор. У нас вы можете найти бесплатное руководство пользователя. Скачайте его с нашего сайта и руководствуйтесь руководством для оптимальной производительности и эффективности. manualshive.com - ваш источник полезной информации для вашего продукта.

Поделиться
Скачать
background image

8-24

MPC860 PowerQUICC UserÕs Manual

MOTOROLA

Part II. PowerPC Microprocessor Module

8.5.5  Updating Code And Memory Region Attributes

The instruction cache does not perform snooping, so if a processor modiÞes a memory
location that may be contained in the instruction cache, software must ensure that such
memory updates are visible to the instruction fetching mechanism. Also, whenever the
memory/cache attributes of any memory region are changed, it is critical that the cache
contents reßect the new attributes. Therefore, when updating code or changing memory
region attributes (in the MMU) the user must perform the following steps:

1. Update code/change memory region attributes
2. Execute a sync instruction to ensure the update/change operation Þnished
3. Unlock all locked cache blocks containing code that was updated
4. Invalidate all cache blocks containing code that was updated
5. Execute an isync instruction

8.6  Data Cache Operation

When the data MMU is enabled (MSR[DR] = 1), the data cache operates as deÞned by the
memory/cache access attributes. When the data MMU is disabled (MSR[DR] = 0), the data
cache operates as deÞned by the default data memory access attributes. The default state of
the write-through/write-back attribute is determined by MD_CTR[WTDEF]; the
caching-inhibited/caching-allowed attribute is determined by MD_CTR[CIDEF]; and the
entire memory space defaults to the guarded attribute. See Chapter 9, ÒMemory
Management Unit (MMU),Ó for more information.

A data cache access begins with a load or store request from the load/store unit (LSU) in
the core. The data cache has a 32-bit data path to and from the load/store unit, allowing for
a 4-byte transfer per cycle. As shown in Figure 8-2, bits 21Ð27 of the data address provide
the index to select a set (0Ð127) within the data cache array. The tags from both ways of the
set are compared against bits 0Ð20 of the data address. If a match is found and the matched
entry is valid, then it is a cache hit. If neither tag matches or the matched tag is not valid, it
is a cache miss. 

The data cache operates in both write-through and write-back modes as programmed by the
memory/cache access attributes. These modes affect store hit and store miss behavior of the
data cache. Load hits and load misses behave the same regardless of the
write-through/write-back mode. If two logical blocks map to the same physical block, it is
considered a programming error for them to specify different cache write policies.

Each data cache block contains two state bits that implement a three-state
(modiÞed-valid/unmodiÞed-valid/invalid) protocol. The MPC860 does not support
snooping of the data cache. All memory is considered to have memory coherency not
required attributes. Therefore, software must maintain data cache coherency. The MPC860
does not provide support for snooping external bus activity. All coherency between the
internal caches and external agents (memory or I/O devices) must be controlled by

Содержание MPC860 PowerQUICC



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC860 PowerQUICC

Raymarine P70 Quick Reference preview
P70
Бренд: Raymarine Страницы: 12
Panasonic FP0 Series Specifications preview
FP0 Series
Бренд: Panasonic Страницы: 27
Panasonic CZ-64ESMC2 Instruction Manual preview
CZ-64ESMC2
Бренд: Panasonic Страницы: 78
Panasonic GM1 Series Reference Manual preview
GM1 Series
Бренд: Panasonic Страницы: 98
NAiS FP0 Series Hardware Manual preview
FP0 Series
Бренд: NAiS Страницы: 173
Panasonic SL-VGU1-EC Instruction Manual preview
SL-VGU1-EC
Бренд: Panasonic Страницы: 2
Accel 300+ Installation Instructions Manual preview
300+
Бренд: Accel Страницы: 8
Icar RPC 8BGA Operating Manual preview
RPC 8BGA
Бренд: Icar Страницы: 40
Icar RPC 8BGA Complete Manual preview
RPC 8BGA
Бренд: Icar Страницы: 86
Icar RPC 8BGA Instruction Manual preview
RPC 8BGA
Бренд: Icar Страницы: 39
Cadac 343 User Instructions preview
343
Бренд: Cadac Страницы: 4
Centurion TB-CN2R1 Instruction Manual preview
TB-CN2R1
Бренд: Centurion Страницы: 16
intech 21 OPLC-2100 Operation Manual preview
OPLC-2100
Бренд: intech 21 Страницы: 15
Gecko MC-MP Service Manual preview
MC-MP
Бренд: Gecko Страницы: 82
Wittenstein TPM dynamic Operating Manual preview
TPM dynamic
Бренд: Wittenstein Страницы: 52
National Instruments cRIO-9064 User Manual preview
cRIO-9064
Бренд: National Instruments Страницы: 26
HANYOUNG NUX TPR-3SL-EP Instruction Manual preview
TPR-3SL-EP
Бренд: HANYOUNG NUX Страницы: 4
Danfoss 087H3803 Installation Manual preview
087H3803
Бренд: Danfoss Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды