manualshive.com logo in svg

Motorola MPC860 PowerQUICC, Руководство пользователя

"Motorola MPC860 PowerQUICC" - отличный продукт для тех, кто ищет высококачественный процессор. У нас вы можете найти бесплатное руководство пользователя. Скачайте его с нашего сайта и руководствуйтесь руководством для оптимальной производительности и эффективности. manualshive.com - ваш источник полезной информации для вашего продукта.

Поделиться
Скачать
background image

20-12

MPC860 PowerQUICC UserÕs Manual

MOTOROLA

Part V. The Communications Processor Module

20.3.4.2  Auto-Buffering and Buffer-Chaining

Buffer-chaining is designed to move large amounts of noncontiguous blocks of data. Even
though each block needs a separate BD, the BDs can be chained together and serviced as a
group. Auto-buffering is used to repeatedly service a BD chain. Note that a chain can range
from one BD to the whole BD table in length.

Setting the CM bit (continuous mode) in a BDÕs status-and-control Þeld enables
auto-buffering; clearing the CM bit enables buffer-chaining (normal mode). The CM bit
must be explicitly programmed for each BD.

When auto-buffering, the descriptorÕs V bit will not be cleared after CPM processingÑthe
BD remains valid for immediate transfer as the current BD pointer cycles through the table.
When buffer-chaining, the CPM invalidates the current BD after processing to allow the
user (the core) to safely manipulate the contents of the buffer and modify its BD. Note that
the V bit behavior is the only difference between auto-buffering and buffer-chainingÑ
auto-buffering can be thought of as continuous buffer-chaining. One use of auto-buffering
is for continuous monitoring of an external instrument, such as an A/D converter.

Set the L bit (last) in the status-and-control Þeld to mark the last BD of a chain. When the
CPM completes a chain, it ßags IDSR[DONE], triggering a maskable interrupt to the core.
The I bit (individual BD interrupt) behavior is independent of the L bitÑthe user may
disable individual BD interrupts (and/or mask them) for multi-buffer chains.

20.3.5  IDMA CP Commands

The core issues the following IDMA commands to the CP:

¥

INIT

 

IDMA

ÑThe CPM resets the IDMA internal state. The current BD pointer is 

reset to the top of the BD table (IBASE).

¥

STOP

 

IDMA

ÑThe CP terminates current IDMA transfers. IDSR[DONE] is set, and 

the current BD is closed. If the destination is memory, the IDMA internal storage 
buffer is transferred before termination, regardless of the source. If the destination 
is a peripheral, the internal storage buffer is ßushed and the transfer terminated 
without writing to the peripheral. At the next request, the next BD in the table is 
processed.

See Section , ÒThe PowerPC core can issue commands to control communications via the
CP command register (CPCR). The CP commands handle special cases, such as initializing
or stopping a channel, and are protocol-dependent.,Ó for the mechanics of issuing CP
commands.

20.3.6  IDMA Channel Operation

An IDMA channel operation consists of the following eventsÑIDMA channel
initialization, data transfer, and block termination. In the initialization phase, the core loads
the global IDMA channel information into the IDMA parameter RAM, builds the IDMA
BD table, and starts the channel. In the transfer phase, the CPM accepts a transfer request,

Содержание MPC860 PowerQUICC



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC860 PowerQUICC

G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
Hanna Instruments HI 8001 Instruction Manual preview
HI 8001
Бренд: Hanna Instruments Страницы: 88
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Бренд: Daikin Страницы: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Бренд: Daikin Страницы: 26
Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual preview
Pulsafeeder MPC Vector
Бренд: Idex Страницы: 114
AUMA VARIOMATIC SARV 07.1 Operation Instructions Manual preview
VARIOMATIC SARV 07.1
Бренд: AUMA Страницы: 32
EFI E-42 Installation And Service Manual preview
E-42
Бренд: EFI Страницы: 127
maxxess eMAX-EP4502 Installation Manual preview
eMAX-EP4502
Бренд: maxxess Страницы: 11
SOLARJACK PVA 5-30 User Manual preview
PVA 5-30
Бренд: SOLARJACK Страницы: 14
Frico IHMC6-3 Original Instructions Manual preview
IHMC6-3
Бренд: Frico Страницы: 8
Watts WFHC 06Z 02 HC RF 24 User Manual preview
WFHC 06Z 02 HC RF 24
Бренд: Watts Страницы: 18
Texas Instruments Errata MSP430F6779 Manual preview
Errata MSP430F6779
Бренд: Texas Instruments Страницы: 27
V2 FORTECO 2500-I Manual preview
FORTECO 2500-I
Бренд: V2 Страницы: 108
S2Tech 699PLUS Instruction Manual preview
699PLUS
Бренд: S2Tech Страницы: 4
t.a.c. DuraDrive MS40-7171 General Instructions Manual preview
DuraDrive MS40-7171
Бренд: t.a.c. Страницы: 16
VARIZOOM VZ-ROCK Operating Instructions preview
VZ-ROCK
Бренд: VARIZOOM Страницы: 2
WAC CTR-WDMX-3CH Installation And Function Instructions preview
CTR-WDMX-3CH
Бренд: WAC Страницы: 5
Infineon XDPL8220 Getting Started preview
XDPL8220
Бренд: Infineon Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды