Mitsubishi SCM100ZJ-S1, Руководство по обслуживанию

Страница: 6 / 246

- -
'11 • SCM-SM-110
Operation section
FAN SPEED button
Each time the button is pressed, the
display is switched over in turn.
OPERATION MODE select button
Each time the button pressed, the
display is switched over in turn.
ON/OFF (luminous) button
Press to start operation, press again to
stop.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
This button changes the air flow (left/right)
direction.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
ON TIMER button
This button selects ON TIMER operation.
AIR FLOW (LEFT/RIGHT) button
3D AUTO button
This button sets 3D AUTO operation.
ALLERGEN CLEAR button
ACL switch
This switch is for resetting microcomputer
and setting time.
OFF TIMER button
This button selects OFF TIMER operation
TEMPERATURE button
These buttons sets the indoor temperature.
(These buttons are used for setting the
current time and timer function as well.)
This button cancels the ON timer, OFF
timer, and SLEEP operation.
CANCEL button
The above illustration shows all controls, but in practice
only the relevant parts are shown.
Unit display section
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off the unit when remote
control is not available.
Remote control signal receiver
Unit ON/OFF button
RUN (HOT KEEP) light (green)
Illuminates during operation.
Blinks when airflow stops due to the HOT
KEEP and CLEAN operation .
ON
OFF
1.5 sec.
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN operation
Notes (1) In case of SCM multi system, Allergen Clear Control function is invalid.
(2) In case of SCM multi system, if [ALLERGEN CLEAR] button is pressed by mistake, the outdoor unit stops to be [All stop indoor units] mode.
(1) (2)
1 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
1.1 SRK, SRF and SRR series
(1) Operation control function by remote controller
(a) SRK series
Models SRK20, 25, 35ZJX-S, 50, 60ZJX-S1, 25, 35ZJR-S, 20, 25, 35, 50ZJ-S
Remote controller