Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 952 / 1224

17 - 22
17.5 CNC Side Settings
17.5.3 CC-Link(ID) connection to M700VS/M70V series
For details of the CC-Link settings of M700VS/M70V series, please contact our company.
17.5.4 Ethernet connection
■1.
System configuration
The following shows the example of the system configuration when using the CNC monitor function.
■2.
Parameter setting
Set parameters related to Ethernet with MELSEC’s peripheral devices in the same way as parameter setting of
MELSEC CPU, and write them on CNC by Personal computer.
(1) Network parameter setting
Set the network parameters by peripheral device and write them on CNC. An example of parameter setting by
GPPW is as follows. Set the first I/O No. as follows according to the expansion slot to which the unit is inserted.
(a) Unit No.
Slot position
Start
I/O No.
Mounting position of extension unit
EXT1 0200
EXT2 0280
EXT3 0300
Ethernet (192.168.1.xx)
<CNC-1>
[Communication with GOT]
N/W No. :239
PLC No. :2
IP address :192.168.1.2
<CNC-2>
N/W No. :239
PLC No. :3
IP address :192.168.1.3
<GOT>
N/W No. :1
PLC No. :1
IP address :192.168.1.1
EXT2
EXT1
Unit2
Unit1
EXT3
EXT1
EXT2
EXT3
EXT1
When mounted
in EXT2 only When mounted
in EXT3 only
EXT2
EXT3
When mounted
in EXT1 and EXT2 When mounted
in EXT1 and EXT3
When mounted
in EXT2 and EXT3 When mounted
in EXT1 only
Unit2
Unit2 Unit1
Unit1
Unit1
Unit1
Unit1