Mitsubishi Electric GOT2000 Series, Руководство по подключению, Страница: 52 / 1224

1 - 22
1.3 Option Devices for the Respective Connection
1.3 Option Devices for the Respective Connection
The following shows the option devices to connect in the respective connection type.
For the specifications, usage and connecting procedure on option devices, refer to the respective device manual.
1.3.1 Communication module
*1 Data transfer in wireless LAN communication may not be as stable as that in cable communication.
A packet loss may occur depending on the surrounding environment and the installation location.
Be sure to perform a confirmation of operation before using this product.
*2 When a wireless LAN configuration of GT Designer3 the [Operation Mode] is set to [access point], the maximum connection
number is a five (recommended).
*3 The product with hardware version A or later (manufactured in December 2013) complies with the regulation.
The product with hardware version A can be used only in Japan.
*4 The product with hardware version B or later (manufactured from October 2014) complies with the regulation.
The product with hardware version B or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, and Liechtenstein.
*5 The product with hardware version D or later (manufactured from May 2016) complies with the regulation.
The product with hardware version D or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.
*6 The product complies with the RE Directive from March 31, 2017.
Product name Model Specifications
Bus connection unit
GT15-QBUS
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (1ch) unit standard model
GT15-QBUS2
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (2ch) unit standard model
GT15-ABUS
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit standard model
GT15-ABUS2
For A/QnACPU, motion controller CPU (A series)
Bus connection (2ch) unit standard model
GT15-75QBUSL
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (1ch) unit slim model
GT15-75QBUS2L
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (2ch) unit slim model
GT15-75ABUSL
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit slim model
GT15-75ABUS2L
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit slim model
Serial communication unit
GT15-RS2-9P RS-232 serial communication unit (D-sub 9-pin (male))
GT15-RS4-9S RS-422/485 serial communication unit (D-sub 9-pin (female))
GT15-RS4-TE RS-422/485 serial communication unit (terminal block)
MELSECNET/H communication unit
GT15-J71LP23-25 Optical loop unit
GT15-J71BR13 Coaxial bus unit
MELSECNET/10 communication unit
GT15-J71LP23-25
Optical loop unit
(MELSECNET/H communication unit used in the MNET/10 mode)
GT15-J71BR13
Coaxial bus unit
(MELSECNET/H communication unit used in the MNET/10 mode)
CC-Link IE Controller
Network communication unit
GT15-J71GP23-SX Optical loop unit
CC-Link IE Field Network communication
unit
GT15-J71GF13-T2 CC-Link IE Field Network (1000BASE-T) unit
CC-Link communication unit GT15-J61BT13 Intelligent device station unit CC-LINK Ver. 2 compatible
Ethernet communication unit GT25-J71E71-100 Ethernet (100Base-TX) unit
Wireless LAN communication unit
*1
GT25-WLAN
• Used for the connection to the IEEE802.11b/g/n compliant, built-in
antenna, access point (master unit)
*2
, station (slave unit), personal
computers, tablets, and smartphones.
• Compliance with
Japan Radio Law
*3
, FCC
*4
, RE
*6
(R&TTE
*4
), SRRC
*5
, KC
*5